Buderus RC35 Installation And Servicing Instructions

Information about the product
2
RC35 programming unit - Technical specifications are subject to change without prior notice.
8
2.5 Validity of these instructions for function modules (accesso-
ries)
These instructions also apply to the programming unit when used in conjunction with the
MM10 mixer module and the WM10 low loss header module.
If the heating system is equipped with other function modules (e.g. SM10 solar module),
you will find additional setting options in some menus. These are described in separate
instructions.
2.6 Accessories
For precise information regarding suitable accessories, refer to the catalogue.
– MM10 mixer module
1
for controlling a three-way mixing valve. The instructions for the
MM10 form part of the RC35 instructions.
– WM10 low loss header module
1
for operating a hydraulic separator
– Solar module and other EMS modules (e.g. ASM10 connection module)
1
– Remote control unit
1
(e.g. RC20/RC20RF) for controlling a particular heating circuit
– Outside temperature sensor, external room temperature sensor
1) The use of modules is not possible with boilers with UBA1.x and DBA.

Buderus RC35 Specifications

General

Display	LCD
Temperature Control	Yes
Weather Compensation	Yes
Communication	EMS Bus
Mounting	Wall-mounted
Voltage	24 V
Temperature range	5°C to 30°C
Accuracy	±0.5°C
Protection class	IP20
Weight	0.3 kg
Power consumption	2 W
Switching current	Not applicable
Ambient temperature	0°C to 45°C