Entering system settings (Service menu – Settings)
6
RC35 programming unit - Technical specifications are subject to change without prior notice.
37
6.5 Solar data
1)
z Turn the rotary selector anti-clockwise until solar data is
selected (marked with
B).
z Press to select solar data.
The menu SETTINGS \ SOLAR is opened.
Menu item
Input range
Factory setting in bold
Other information
Which operation mode
should be used?
Automatic
permanent operation ON, per-
manent operation OFF
1)
1) Not possible or not available for boilers with UBA1.x and DBA.
What is the max. stor. cyl-
inder temp. of the solar
system?
60°C
30°C to 90°C
1)
What temp. must the
storage cylinder not fall
below?
OFF
30°C to 54°C, OFF
1)
What is the minimum
pump rating?
30%
20% to 100%
1)
Table 14 Navigator for Service menu SETTINGS \ SOLAR
For explanations of the settings, see the documentation for the SM10 solar
module.
boiler data
domestic hot water
heating circuit 1
solar data
SERVICE\SETTINGS
B
To Next Page
Loading...
Need help?
General
