9
Chapter 1 Getting Started
Installing Applications
NAS Navigator2
For Windows or macOS 10.12 and Earlier
1 Go to the d.buffalo website (http://d.buffalo.jp/LS200/) to download the installer.
2 Select the region and model to go to your specific model’s d.buffalo website.
3 Download the NAS Navigator2 installer and install it onto your computer.
For macOS 10.13 and Later
1 Open Mac App Store and search for the NAS Navigator2 app.
2 Click [Get], then [Install].
SmartPhone Navigator
SmartPhone Navigator will allow you to open LinkStation’s Settings, change the IP address, and configure
WebAccess settings. Follow the procedure below to install the application.
1 Open App Store (iOS devices) or Google Play (Android devices).
2 Search for and install “SmartPhone Navigator”.
WebAccess
WebAccess will allow you access files on the LinkStation. Follow the procedure below to install the WebAccess
application.
1 Open App Store (iOS devices) or Google Play (Android devices).
2 Search for and install “WebAccess”.
Settings Up Through Setup Wizard
When you access Settings for the first time, or after initializing the LinkStation’s settings, the setup wizard will
automatically appear. To set up the LinkStation using the wizard, follow the procedure below.
To Next Page