EasyManuals Logo

Bukh D4 User Manual

Bukh D4
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Running In
The engine must be run in during the first 10 hours of
operation. Do this by using the engine in normal
operation, where full load is only applied for short
periods of time. Never run the engine at constant
speed for any longer periods of time.
Since oil consumption is higher during the running in
period, be sure to control the oil level more frequently
than normally recommended.
Refer to Maintenance, page 87 for more
information.
Fuel, Oils and Coolant
Only use the fuels and oils recommended in the
Technical Data, page 129, since other grades may
cause malfunctions, increased fuel consumption, and
possibly shorten the life of the engine.
Always change the oil, oil filters, and fuel filter at the
specified maintenance intervals.
Make sure to always use suitable and correctly mixed
coolant.
Future warranty claims related to engine and
accessories may be denied if an unsuitable coolant
has been used, or if the instructions for coolant
mixture have not been followed.
Maintenance and replacement parts
Bukh engines are designed for maximum reliability
and long life. They are not only built to withstand a
demanding environment, but also to have the
smallest possible environmental impact. These
qualities will be maintained through regular servicing
and the use of spare parts with the same quality as
Bukh original spare parts. If reliable and purpose-
built parts are not used, your safety, health, and the
machine's function may be compromised. Bukh has
a world-wide network of authorized dealers.
They are Bukh product specialists, and have the
accessories, genuine parts, test equipment and
special tools needed for high quality service and
repair work. Always observe the maintenance
intervals in the manual, the complete Service Protocol
can be found at volvopenta.com. Remember to note
the engine / transmission identification number when
you order service and spare parts.
Excessive Strain On a Product and
Components
Bukh products and their components are not
dimensioned for external loads. Never stand or step
onto an engine, transmission or its components.
Loads can bring about damage and the malfunction
of a product or property.
Introduction
47708085 11-2016 © Bukh 9

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bukh D4 and is the answer not in the manual?

Bukh D4 Specifications

General IconGeneral
BrandBukh
ModelD4
CategoryEngine
LanguageEnglish

Related product manuals