Joystick
Joystick calibration need only be carried out if boat
movements
do not correspond to joystick movements.
When calibrating the joystick, the boat must be driven
on open waters in safe conditions. Avoid calibrating in
high winds or currents that can influence the result of
the calibration.
Allow the boat to run for a fairly long distance during
calibration. Hold the joystick firmly in position.
Calibration can only be carried out at a helm station
that is equipped with both a joystick and a control
panel.
Calibration need only be done in one direction, port or
starboard.
Calibration and Settings
122 47708085 11-2016 © Bukh
To Next Page
Loading...
