Electrical System
The engine
is equipped with a 2-pole electrical system
and an alternator.
WARNING!
Always stop
the engine and break the current using the
main switches before working on the engine.
IMPORTANT:
Contact a Bukh dealer for information if any arc
welding will be performed on the boat.
Arc welding can cause damage to the engine and boat
electronics.
Fuses
IMPORTANT:
Always investigate the cause of the overload. If the
fuse trips frequently, contact an authorized Bukh
workshop.
Engine
The engine is fitted with a semi automatic circuit
breaker. The circuit breaker cut the power if the
system is overloaded.
If it is not possible to start the engine or if the
instrument stops working while running, the circuit
breaker may have been activated.
Reset by pressing in the red circuit breaker (1).
Power Trim
Engines fitted with a drive have a semi automatic
circuit breaker for the Power Trim engine.
The circuit breaker cuts the power if the Power Trim
system is overloaded. Reset by pressing in the circuit
breaker (2).
Maintenance
47708085 11-2016 © Bukh 103
To Next Page
Loading...
