EasyManua.ls Logo

Bukh D4 - Service Schedule and Safety Precautions

Bukh D4
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Schedule
Your Bukh engine and its equipment are designed for high reliability and long life. The engines are built to have
the smallest possible environmental impact. If preventive maintenance is carried out, according to the
maintenance schedule, these qualities will be retained and unnecessary malfunctions will be avoided. It is the
owner's responsibility to make sure that the services in the service intervals are performed in order for the warranty
to be valid.
NOTICE! For emission related warranty rights see Emission Control System Warranty Statement.
Service Intervals
Service intervals are shown below. The service content can be found in the Service Protocol available for
download at www.volvopenta.com.
The Operator’s Manual shows a selection of service points and how these should be carried out; also included
are points that must be checked/implemented between regular scheduled services or points that the user/owner
should be able to perform for reasons of safety in the event that anything unforeseeable should occur when under
way. All service and maintenance points can be found in the product’s Service and Maintenance Manual. Any
owner wishing to carry out some maintenance and service himself can purchase this manual. For products
covered by the warranty, please refer to the terms and conditions of the warranty with regard to documentation
of completed services.
Extended service intervals
The interval between engine oil changes may be extended in certain circumstances. To determine whether the
service interval may be extended, Volvo Penta's conditions for extended service intervals must be met and an oil
analysis performed. Contact your Bukh dealer for further information.
Where both operational and calendar times are specified, perform the maintenance item at whichever time is the
sooner.
In applications that include a reverse gear, the reverse gear manufacturer's service intervals must be complied
with.
A-E = Type of service (regular service)
Type A
Service Every 200 hours of operation.
(Recommended every 12 months)
Type B Service Every 400 hours of operation.
(Recommended every second year )
Type C Service Every 800 hours of operation.
(Recommended every second year )
(Not applicable for inboard installations)
Type D Service Every 800 hours of operation.
(Recommended every fourth year)
(Type C service for inboard installations)
Type E Service Every 2000 hours of operation.
(Recommended every fourth year)
(Type D service for inboard installations)
NOTICE! Make sure that the service book is stamped after each performed service.
86
47708085 11-2016 © Bukh

Table of Contents

Related product manuals