Lubrication System
Engine: D4 D6
Oil volume, (incl. oil filter)
for all allowed installation inclinations 12 liters (3.2 US gal) 20 liters (5.3 US gal)
volume difference MIN – MAX 1.2 liters (0.3 US gal) 3.5 liters (0.9 US gal)
Oil pressure, hot engine,
idling 125 kPa (18.1 PSI) 125 kPa (18.1 PSI)
at full speed 440 kPa (63.8 PSI) 440 kPa (63.8 PSI)
Oil, viscosity: SAE 15W/40 (See table) SAE 15W/40 (See table)
Oil Grade and Oil Change Interval
Oil grade
1)
Sulphur content in fuel, by weight
< 0.5 – 1.0%
more than 1.0%
2)
Oil change interval: Reached first in operation:
All engines:
VDS-3
200 hr. or 12 months 100 hr. or 12 months
NOTICE! Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality
requirements above.
1)
Lowest recommended oil grade. Engine oil with higher oil grade is always possible to use.
2)
If sulphur content is > 1.0% by weight, use oil with TBN > 15.
VDS
TBN
=
=
Volvo Drain Specification
Total Base Number
Viscosity
Select the viscosity according to the table.
The temperature values refer to stable ambient
temperatures.
* SAE 5W/30 refers to synthetic or semi-synthetic oils.
Technical Data
47708085 11-2016 © Bukh 129
To Next Page
Loading...
