Bukh D4 - Seawater Filter, Check and Cleaning

Seawater Filter, Check and Cleaning
WARNING!
Risk of water entry. Close the seawater cocks before
doing any work on the seawater system.
If the water where the boat is used contains
contaminants, seaweed, etc. the filter should be
checked more frequently than stated in the
maintenance schedule. Otherwise there is a risk that
the
filter may be blocked resulting engine overheating.
1 Close the sea cock.
2 Unscrew the cover (1) and remove the sealing plate
(2).
3 Lift out the insert (3) and clean it.
4 Replace parts as illustrated.
5 Open the sea cock and check for leaks.
Maintenance
102 47708085 11-2016 © Bukh