Swim platform Interface
A
swim platform interface can be connected to the EVC
system in a boat with a movable swim platform. The
interface will detect the position (up/down) of the swim
platform and prevent the engine/s from cranking or
drive/s to be trimmed up if the swim platform is
lowered. It is possible to override the inhibit of crank
and trim following the instructions for override in the
display. Be aware of that perform override could
damage the swim platform or drives. The interface will
also disable the possibility to lower the swim platform
when any engine is running, drive position is not
centered or drive/s trimmed too high. To be able to
control the swim platform when a swim platform
interface is connected, all drivelines need to be in
ignition ON.
Optional
47708085 11-2016 © Bukh 55
To Next Page
Loading...
