5 CRUISE CONTROL
Switch on cruise control by pressing the button.
Fine
tune the locked engine speed by increasing (+)
or reducing (-) engine rpm with button (3).
6 TRIM ASSIST
The Power Trim Assistant, PTA, adjusts the trim
angel automatically according to engine speed
(rpm), see Power Trim Assistant, page 32 for
information.
7 Safety Lanyard
The safety lanyard is an accessory to increase the
safety if the driver of the boat falls in the boat or
overboard and the propulsion of the boat has to
stop. If the lanyard looses contact with its socket on
the lever, the engine will ramp down to idle and put
itself in neutral gear. When idle and neutral is
reached, the engine will shut down. If the safety
lanyard is pulled out, a buzzer alarm as well as
alarm on all displays will be activated. In order to
regain control, the driver or the new driver must set
lever to neutral and restart the engine. If the engine
is started without the safety lanyard attached, an
intermittent buzzer will be active. The intermittent
buzzer is active until the safety lanyard is back in
its socket.
CAUTION!
The safety lanyard should always be attached to
the current driver.
8 THROTTLE ONLY
Disconnects the shift function so that the control
lever only affects engine speed; refer to
"Disengaging shift function" in this chapter for
further information.
9 Neutral interlock
The neutral interlock prevents acidentally moving
the throttle out of neutral.
Depress
the interlock button to move control out of
neutral.
The neutral interlock will automatically re-engage
when the control handle is returned to the neutral
position.
Instruments and Controls
47708085 11-2016 © Bukh 37
To Next Page
Loading...
