Intake Manifold Temperature
Possible cause:
Corrective action:
Charge air temperature is too high and engine power is reduced.
Contact your Bukh workshop.
Key Failure
Possible cause: A button on the e-Key panel is pressed down.
Corrective action: Verify that the button is not pressed down.
Power Trim Faults
Possible cause: Drive unintentionally moved in. Not possible to control the power trim.
Corrective action: Verify power trim angle before you continue your journey.
Refer to In Case of Emergency, page 85.
Primary Battery
Possible cause: Poor batteries or poorly charged batteries.
Corrective action: Change or charge batteries. Refer to Battery, page 105.
Secondary Battery
Possible cause: Poor batteries or poorly charged batteries.
Corrective action: Change or charge batteries. Refer to Battery, page 105.
Sensor Failure
Possible cause: A sensor failure may be affecting engine performance.
Corrective action: Contact your Bukh workshop.
Steering failure
Possible cause: The helm station has lost communication with the steering actuator.
Corrective action: Please contact a Bukh workshop.
Steering Oil High Temp
Possible cause: The temperature on the steering oil is to high.
Corrective action: Check hydraulic steering oil cooling system. refer to Maintenance, page 109.
Fault Code Register
76 47708085 11-2016 © Bukh
To Next Page
Loading...
