ATTENTION
3.1.1 Bluetooth Handset
Adjust the mattress base height whenever necessary, but at least once a day, to the up-
permost or lowest height. This automatically equalises the two independent adjustment
drives and results in a level horizontal mattress base.
[1] Backrest
[2] Mattress base height
[3] Thigh rest
[4] Reverse-Trendelenburg posi-
tion
[5] Magnetic sensor (identifiable
by cross-hair symbol)
[6] Sleep position
[7] Battery symbol
[8] LED
[9] Locking symbol
Damage to the bed / objects
If the bed continues to be misaligned (ramped up) in the adjustment path due to overloading
or obstacles (e.g. window sills), this may cause damage to the bed or other objects since
the drive system does not have an electronic overload shut-off.
•
Therefore, avoid putting more weight on the bed than the permitted weight.
•
Make sure that the entire adjustment range of the bed is free of obstacles. Furniture, win-
dow sills, sloping roofs, etc. must not be in the way of the adjustment path.
The Bluetooth handset allows great freedom of movement (2 to 3 metres inside the room).
Operation
10 Part C: Care staff and residents
To Next Page
Loading...
