ATTENTION
2.3 Special Hazards
2.3.1 Risk of Fire
WARNING
Damage to the bed / objects
If the bed continues to be misaligned (ramped up) in the adjustment path due to overloading
or obstacles (e.g. window sills), this may cause damage to the bed or other objects since
the drive system does not have an electronic overload shut-off.
•
Therefore, avoid putting more weight on the bed than the permitted weight.
•
Make sure that the entire adjustment range of the bed is free of obstacles. Furniture, win-
dow sills, sloping roofs, etc. must not be present in the adjustment path.
Risk of fire
Various external factors can result in a fire. To prevent a fire, take the following precaution-
ary measures:
•
Use only flame-retardant mattresses and bedding if possible.
•
Inform residents that smoking is not allowed in bed.
•
Use only suitable mattresses that comply with the German standard DIN 13014 and are
not too soft. Furthermore, these mattresses must resist ignition in accordance with DIN
EN 597-1 and -2.
•
Only use additional devices (e.g. electric blankets) and other electrical devices (e.g.
lamps, radios) that are in perfect working order and ensure that their connection cables
cannot be damaged by moving parts of the bed.
Safety Information
8 Part B: Operator and Technical Personnel
To Next Page
Loading...
