6.3 Replacement parts
Inspection report
If inspection was not passed:
[ ] Defective, do not use bed! => Repair
[ ] Defective, do not use bed! => T
ake out of service
[ ] Bed does not meet the safety standards
Test approval sticker applied:[ ] yes [ ] no
Documents that form part of this inspection report:
[ ] Enclosure:
[ ]
Remarks:
Inspected on: Inspected
by:
Signature:
Evaluated on: Operator/
Expert:
Signature:
The relevant replacement parts are available from BURMEIER, by specifying the item num-
ber
, order number and serial number. You will find the necessary details by referring to the
type plate and the PID number, which is located on the mattress base frame at the head end.
For more information, please refer to
Part A: Type plate » 9 and to chapter Part A: PID
Number » 11.
In order to maintain operational reliability and the right to claim under warranty
, only original
BURMEIER replacement parts may be used! To order replacement parts, or make customer
service requests or other queries, please contact:
Maintenance
Part B: Operator and Technical Personnel 39
To Next Page
Loading...
