2.2.5 Power Pack
ATTENTION
2.2.6 Bed Adjustment
ATTENTION
CAUTION
Working environment
Failure to follow this can lead to system malfunctions or material damages!
•
After transport/storage in a cold environment, the power pack should not be operated until
it has reached room temperature.
Material damage
The care bed could be damaged, and this could have an adverse effect on the loading ca-
pacity of the care bed or the adjusting functions.
Ensure that:
•
No obstacles such as bedside cabinets, supply rails, other equipment, chairs, wall protec-
tion rails or sloping roofs are in the way,
•
There are no objects lying beneath the bed,
•
People do not sit on slightly raised sections of the backrest and leg rests.
Asynchronous drives
Lifting drives that do not move synchronously cause the lying surface to be inclined.
•
Adjust the mattress base height whenever necessary, but at least once a day, to its upper
or lowest height. This automatically equalises the two independent lifting drives and re-
sults in a level horizontal mattress base.
Safety Information
Part B: Operator and Technical Personnel 7
To Next Page
Loading...
