BWT Bewamat COMB 1 - Installation

40
EN
6 Installation
(Figuresmaydi󰀨er.)
Positionthesofteningcolumnwiththecentraltube
behind the regenerative container.
NOTE
► The softening column does not fully t into the recess;
therefore, place it very close to the regenerative container.
If there is no cover on the central tube, cover the
tube.
PourintheEcomixltermaterial.
NOTE
► Ensure that no lter medium enters into the central tube.
Remove the cover from the central tube.
Setthecontrolvalve onto theangeandensure
that the thread does not tilt.
Tightly screw on the control valve.