BWT Bewamat COMB 1 - Checks; Intended Operation; Operator Responsibilities

51
51
EN
9 Operator responsibilities
You have purchased a product that is durable and
easy to service. However, certain duties must be
carried out. Flawless function requires:
● Operation as intended
● Regular checks and servicing
Check the quality and pressure conditions of the
inowwaterregularlywithyourwatersupplier.Ifthe
water quality changes, the settings may need to be
changed. Consult a specialist in this case.
To ensure the proper functioning and safety of
the product, regular inspections must be carried
outbytheoperator(every2months),androutine
maintenance(EN806-5)mustbeperformedbythe
BWTafter-salesservicesta󰀨oratterauthorised
byBWTtocarryoutmaintenance(every6months).
The replacement of wearing parts within the pre-
scribed intervals is also required for the warranty
and proper functioning of the unit.
9.1 Intended operation
The intended operation of the product includes
commissioning, operation, decommissioning and,
if necessary, recommissioning. Intended opera-
tion of the product and drinking water installation
requires regular checks, servicing and operation
(water ows through the product) in accordance
with the operating conditions for design and con-
struction, including simulated sampling (manual or
automatedushing),whereappropriate.Ifsimulated
sampling is not possible, the product must be taken
out of service.
9.2 Checks
(Carried out by the operator)
BWT recommends that the operator regularly carry
out the following checks and record the results:
● Water quality. Depending on the product,
inowwatervaluesandsetoutletwatervalues
may need to be corrected.
● Water pressure. If the pressure conditions
change, the product settings may also have to
be changed.
● Operating condition of the product.
● Check whether messages have been issued.
● Watertightness.