BWT Bewamat COMB 1 - English

31
31
EN
1 Safety instructions 32
1.1 General safety instructions 32
1.2 Validity of this documentation 32
1.3 Personnelqualications 32
1.4 Transport and installation 33
1.5 Symbols used 33
1.6 How safety instructions are displayed 33
1.7 Positionspecications 33
1.8 Product-specicsafetyinstructions 34
1.9 Important notes on the product 35
2 Scope of delivery 36
3 Intended use 37
3.1 Properuse 37
3.2 Foreseeable misuse 37
3.3 Disclaimer 37
3.4 Other applicable documentation 37
4 Function 37
4.1 General 37
4.2 Operation 37
4.3 Regeneration 37
4.4 Operation 37
4.5 Stagnation management 37
4.6 Safety 38
5 Installation conditions 38
5.1 General 38
5.2 Installation site and environment 38
5.3 Feed water 38
5.4 Installation 39
5.5 Operation 39
5.6 Functional and warranty conditions 39
6 Installation 40
6.1 Installation diagram 42
7 Start-up 44
7.1 Operating the controller 44
7.2 Setting the time and day of week 45
7.3 Preparingthebrine 46
8 Operation 47
8.1 Handing over the unit to the operator 47
8.2 Setting the supply of softened water 47
8.3 Modifying the regeneration time 49
8.4 Starting manual regeneration 49
8.6 Service message 50
8.5 Adding regenerative 50
9 Operator responsibilities 51
9.1 Intended operation 51
9.2 Checks 51
9.3 Inspection 52
9.4 Maintenance in accordance
with EN 806-5 53
9.5 Replacement of parts 53
10 Warranty 54
11 Troubleshooting 54
12 Technical data 55
12.1 Feed water requirements 57
13 Decommissioning and disposal 58
13.1 Decommissioning 58
13.2 Disposal 58
14 Standards and legal provisions 58
EU Declaration of Conformity 59
Table of Contents