BWT Bewamat COMB 1 - Page 55

55
55
EN
12 Technical data
Multi-target lter Type COMB 1 PRO 1
Nominal connection width DN 32 to 20
Connection type G 1¼" to G ¾"
Nominal capacity in accordance with
DIN EN 14743
m
3
/h(mol) 50(8.9) 42.5(7.6)
Capacity/kg of regenerative salt in
accordance with DIN EN 14743
mol 1.9 to 3
Peakowwithclosedblending m
3
/h 1.2
Operatingow
(softeningfrom20°dHtoapprox.0°dH)
m
3
/h 1.0
Nominalow m
3
/h 1.6
Nominalpressure(PN) bar 10
Operating pressure bar 2.5 to 8
Pressuredropatoperatingow bar 0.5
Filtermaterialllquantity l 25
Supply of regenerative, max. kg 50
Regenerative consumption per 100%
regeneration, approx.
kg 2.5 to 4.0
Flushing water consumption per 100%
regeneration at 4 bar, approx.
l 250
Rinsingwaterowrate,max. l/h 750
Regeneration duration per 100%
regeneration
min. 140
Water/ambient temperature, min./max. °C 5 to 30 5 to 40
Humidity Non-condensing
Powersupply V/Hz 230 / 50
Unit voltage V/AC 18
Protectionclass IP53
Connected load, max. W 30
Dimensions W x H x D mm 390 x 1090 x 750
Connection height of water inlet A mm 960
Connection height of water outlet A mm 960
ConnectionheightofoverowS mm 650
Sewage system connection DN 50
Shipping weight, approx. kg 55
Operating weight, approx. kg 120
Production number (PNR) 6-501303 6-501304