BWT Bewamat COMB 1 - Adding Regenerative; Service Message

50
EN
8.5 Adding regenerative
Checkthellingleveloftheregenerativeregularly;
the regenerative container must not be completely
empty.
Refill the regenerative before the sieve base
becomes visible. All commercially available
regenerative salts (salt tablets in accordance with
DINEN973typeA)canbeused.
● Openthecover(4).Pourregenerativeintothe
storagearea(5).
It is important that no dirt gets into the storage area
(5)duringrelling(ifnecessary,cleantheregener-
ativepackagesbeforeuse).
Any dirt in the storage area or brine cavity (6)must
be cleaned carefully with drinking water.
6
4
5
8.6 Service message
4433 L
Aashinglitredisplayindicatesthatitistimefor
servicing. The service reminder appears after
150 regenerations.
PleasecontactBWTafter-salesservice.