BWT Bewamat COMB 1 - Page 48

48
EN
Use the Change mode button to switch to
programming mode.
SEt
The display shows SEt
Conrmprogrammingmode.
Time
4688 L
Switch to the softened water supply setting.
Conrm the setting for the supply of softened
water.
4688 L
The view of the current setting ashes on the
display.
Set the calculated supply of softened water in
litres.
3750 L
Conrmthesetting.
3750 L
The new supply of softened water is not displayed
until after the next regeneration.
Close programming mode.