1. Insert the key and turn it
anticlockwise.
2. Press and hold the knob switch, while
turning it clockwise to the red area.
3. Remove the hitch, turn the key
clockwise to lock the hitch, and then
remove the key.
4. Place the hitch body into the storage
bag and store it in a secure location.
CAUTION
●
Do not grasp the locking cylinder
because it needs to rotate freely.
●
The key can be removed only if
the hitch is locked. This indicates
a proper connection. Do not use
the hitch if the key is not removed.
●
If the hitch does not lock into the
housing, it falls out when pulled
down.
●
BYD recommends making a note
of the key code. You will need this
code if you lose the key and need
to order a replacement.
●
To maintain the hitch, regularly
grease its surfaces with non-
resinous grease.
WARNING
●
Be careful when turning the
locking cylinder. If it does
not lock into the "Open
Position"/"Closed Position", it
automatically retracts to its
original "Closed Position"/"Open
Position" and may pinch the
ngers.
Electrical connections
●
All trailers are equipped with taillights,
brake lights, side marker lights and
turn signals.
●
To provide power for trailer lighting,
a built-in 13-pin electrical connector is
provided for the hitch.
●
When the vehicle is stationary,
plugging the trailer plug into
the vehicle electrical connector
automatically activates the trailer
mode.
1 Left turn signal
2 Rear fog light
117
04
USING AND DRIVING
To Next Page
Loading...
