Index-2 Rev F
bolt selection 3-8
general strand/pedestal 3-5
strand/pedestal mounting with EMBs 3-6
wall mounting 3-8
wall mounting with EMBs 3-10
opening 3-4
options 1-4
physical characteristics A-3
preparing for installation 3-1
replacement 6-6
I
identification 2-1
input and output values A-4–A-5
input configuration A-2
installation. See housing, maintenance
installing plug-in accessories C-3
integrated power supply replacement 6-4
J
jumper removal C-4
jumper wires C-3
jumpers C-3
L
level control 1-4
M
maintenance 6-1
fuse replacement 6-1
general inspection 6-1
housing replacement 6-6
power supply replacement 6-3
RF module replacement 6-2
materials required 1-6
MCS-550 C-9
MEQ-42 C-11
MEQ-55 C-10
MEQ-550 C-9
MEQ-65 C-10
MEQT-42 C-11
MEQT-55 C-10
MEQT-550 C-9
MEQT-65 C-10
model options
bandwidth 1-4
frequency split 1-4
housing 1-4
housing finish 1-4
internal cable equalization 1-4
level control 1-4
module designator 1-4
powering 1-4
return 1-4
series 1-4
spacing 1-4
mounting
bolt selection 3-8
strand/pedestal 3-5
strand/pedestal with EMBs 3-6
wall 3-8
wall with EMBs 3-10
N
notes. See document conventions
O
operational gain A-4–A-5
output configuration A-2
P
part number
clamps and bolts 1-7
diplex filter 1-7
E7 Line Extender 1-4
EMB (3.2-inch bracket) 3-6, 3-10, 3-11
EMB (6-inch bracket) 3-6, 3-10, 3-11
integrated power supply 6-4
zero gain adjustment 1-7
zero slope adjustment 1-7
power passing 4-2
power supply
AC testpoints 4-3
configuration 4-1
fusing 4-2
power passing A-2
power supplies and housings A-3
replacement
To Next Page
Loading...