Caen N1471 - Fig. 3.21: Group VSET Access Screen; Fig. 3.22: Group VSET Digit Selection Screen; Fig. 3.23: Group Channel VSET Digit Access Screen; Fig. 3.24: Group VSET Digit Adjust Screen

PRELIMINARY
Document type: Title: Revision date: Revision:
User's Manual (MUT) N1471 4 Channel Programmable HV Power Supply 24/03/2010 1
NPO: Filename: Number of pages: Page:
00112/07:N1471.MUTx/01 N1471_REV1.DOC 38 24
Push the TUNE ROTARY SWITCH: at this point the parameter is selected, its frame is
shown in red and its name in blue (only one value common to all channels; pre-set value
is picked from Channel 0); it is now possible to change the parameters value.
Fig. 3.21: Group VSET access screen
Turn the TUNE ROTARY SWITCH until the value digit to be edited is shown in blue, the
parameter name in yellow
Fig. 3.22: Group VSET digit selection screen
Push the TUNE ROTARY SWITCH: at this point the value digit becomes yellow and can
be edited
Fig. 3.23: Group Channel VSET digit access screen
Turn the TUNE ROTARY SWITCH until the digit reaches the desired value
Fig. 3.24: Group VSET digit adjust screen