13
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2009 Calix. All Rights Reserved.
General Safety Recommendations
WARNING! The intra-building port(s) of the equipment or subassembly is
suitable for connection to intra-building or unexposed wiring or cabling only.
The intra-building port(s) of the equipment or subassembly MUST NOT be
metallically connected to interfaces that connect to the Outside Plant (OSP)
or its wiring. These interfaces are designed for use as intra-building
interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE,
Issue 4) and require isolation from the exposed OSP cabling. The addition
of Primary Protectors is not sufficient protection in order to connect these
interfaces metallically to OSP wiring.
WARNING! This product is intended to be protected by a surge protector
that meets the applicable criteria of GR-974-CORE or GR-1361-CORE.
Failure to utilize this appropriate surge protector could result in susceptibility
to lightning surges or create a potential hazard due to power faults.
WARNING! Only trained, qualified technical personnel should perform the
procedures described in this document. These procedures involve
potentially hazardous activities that could cause injury to untrained
personnel.
DANGER! Risk of high power current surge and electric shock. Read and
understand all power procedures before performing tasks. Take necessary
precautions and use appropriate insulated tools when working with power.
This equipment must be installed, operated, and serviced by qualified
technical personnel only.
DANGER! CLASS 1 LASER PRODUCT. INVISIBLE LASER RADIATION
PRESENT. Fiber optic radiation can cause severe eye damage or
blindness. Do not look into the open end of an optical fiber.
ESD ALERT! Beware of electrostatic discharge. Follow standard ESD
precautions. Always wear a grounded ESD wristband to avoid damaging the
electronic equipment.
To Next Page
Loading...
Need help?
General
