35
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2009 Calix. All Rights Reserved.
Wiring the Ethernet Line Interfaces
This section describes how to connect to the E5-400 Ethernet line interfaces, which includes
the following:
(12) GE SFP ports (1000/100 Mbps), with the following SFP module options:
100/1000 BaseT copper SFP
1000 Mbps dual and single fiber SFP
(2) 10GE SFP+ ports (10 Gbps)
10GE optical SFP+
10GE passive copper SFP+
(2) 10GE XFP ports (10 Gbps)
Equipping the Mini GBIC Slots
The E5-400 Ethernet ports use Small Form-factor Pluggable (SFP, SFP+, XFP) modules to
provide the line interface connections using mini Gigabit Interface Converter (GBIC)
transceiver modules. The hot-swappable GBIC transceivers are modular units that house a
transmitter and a receiver.
E5-400 units do not ship with GBIC transceivers. Use transceivers that comply with the SFP
Transceiver MultiSource Agreement (MSA). See the Small Form Factor (SFF) committee
INF-8074i specification Rev 1.0 for details.
You can use different GBIC transceiver types to connect to devices with different types of
fiber-optic connectors. Use transceivers with the following specifications per port type:
Ethernet
Port Type
Module
Type
Quantity Interface Description
GE SFP* 12 1GE (1000 Mbps) dual and single fiber SFP
100 Mbps dual and single fiber SFP
10/100/1000 BaseT copper SFP
10 GE
SFP+ 2 10GE (10 Gbps) optical
10GE (10 Gbps) copper
XFP 2 10GE (10 Gpbs) optical
*All SFPs must be Class 1 laser devices in accordance with FDA regulation 21CFR 1040.10,
1040.11, and IEC 60825-1.
To Next Page
Loading...
Need help?
General
