Calix E5-400 User Manual

16
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2009 Calix. All Rights Reserved.
Tools
The following tools are necessary to complete an installation:
 Phillips screw driver/nut driver
 5/16-inch wrench or socket
 Wire wrapper/cutter/stripper
 Crimp tool
Test equipment
Depending on the system configuration, the following test equipment may be needed:
 Digital Volt/Ohm meter
 Optical power meter
 Bit Error Rate tester

Calix E5-400 Specifications

General

Brand	Calix
Model	E5-400
Category	Network Router
Language	English