❶
❷
❹
❸
Page
20 - Manual FA01869-EN - 08/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
MENU ITEMS VALUES
[
▲
] [
▼
]
❶
LANGUAGE
KEYPAD
[] ->
[]
Italiano - English
Français - РУССКИЙ
[]
<- [#]
[
▲
] [
▼
]
❷
ADDRESS
KEYPAD
[] ->
[]
ADDRESS
N.--XX
[]
<- [#]
[
▲
] [
▼
]
❸
TAMPER
[] ->
[]
ENABLED/
DISABLED
[]
<- [#]
[
▲
] [
▼
]
❹
CONTRAST
DISPLAY
[] ->
[ ] ▌▌▌▌▌▌▌▌▌‒ []
<- [#]
[
▲
] [
▼
]
❺
BRIGHTNESS
DISPLAY
[] ->
[] ▌▌▌▌▌▌▌ []
<- [#]
[
▲
] [
▼
]
❻
LIGHTING
KEYPAD ON
[] ->
[] ▌▌▌▌▌▌▌▌▌ []
<- [#]
[
▲
] [
▼
]
❼
LIGHTING
STANDBY KEYPAD
[] ->
[]
▌
[]
<- [#]
[
▲
] [
▼
]
❽
BRIGHTNESS
STATE LED
[] ->
[ ] ▌▌▌▌▌▌▌ []
<- [#]
[
▲
] [
▼
]
PXITU01 key reader and PXTAG01 key PXTAG01/PCT/TST01 keys
The PXITU01 key reader is a transponder reader of PXTAG01 keys,
which allows to manage the alarm system when turning on and off
using up to 3 scenarios that can be changed.
EN50131 GRADE 3 certified device (
).
The key is used to manage the system through key reader. It does
not contain batteries and to work it must have been previously ac-
quired by the control unit.
Each key is uniquely recognized within the control unit and the event
memory.
If in the
SPECIAL FUNCTIONS
of the technical menu the
PRE-ARMING TEST
has been enabled, in the case of existing anomalies in the system
(no telephone line, no communication with at least one device in the
system, etc.) the starting of the scenarios through the key reader will
be inhibited (the key reader emits a beep and cancels the operation).
❶ hole cover cap, civil series
❷ transponder key reader
❸ warning LED
❹ key sensitive zone
MENU ITEMS VALUES
❾
BUZZER
[] ->
[]
ENABLED/
DISABLED
[]
<- [#]
[
▲
] [
▼
]
❿
BUTTON MODE
WAKEUP
[] ->
[]
VALID/
NOT VALID
[]
<- [#]
[
▲
] [
▼
]
⓫
KEYPAD CLEANING
[] ->
[]
30 s
[]
<- [#]
[
▲
] [
▼
]
⓬
VERSION
KEYPAD
[] ->
[]
CAME
v.X.YY BUILDN
[]
<- [#]
[▲] [▼]
To Next Page
Loading...
