CAME PXC2-32 - System Accessories; PXONV Camera Integration Module; PXMC3 G GSM;UMTS Connectivity Module; PXMC3 G Module Description and LEDs

❶
❷
❶
❹
❶
❷
❸
Page
24 - Manual FA01869-EN - 08/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Accessories
PXONV
Expansion Module, allows the integration of cameras with Onvif pro-
tocol connected to the PXC2-32, PXC2-64, PXC2-212 security control
units.
BOARD DESCRIPTION
❶ Warning LED
❷
Connector for connecting to the PXC2 control-unit board.
INSTALLATION
Remove the power supply and connect the board to the control unit,
making sure that the connections are made correctly.
Do not force the board into the control unit.
PXMC3G
BOARD DESCRIPTION
GSM telephone dialler and GSM/UMTS connectivity module for PXC2
control units complete with stylus antenna.
EN50131 GRADE 3 certified device (
).
For:
- sending SMSs and voice messages and for receiving SMSs and
DTMF commands for remote control
- sending of digital ContactID signals to the surveillance centers
- remote management of the control unit through smartphone/tablet
using the 3G network.
DESCRIPTION OF PARTS
❶ GSM antenna connector
❷ Micro-SIM-CARD slot
❸ Status warning LED
❹ Connector for connecting to the PXC2 control-unit board
❺ Antenna cable + stylus antenna
❻Cable gland
LED STATUS
Off
Flashing (1 flash per second)
Slow flashing (1 flash every 3 secs.)
Quick flash (2 flashes per second)
Meaning Status
Module off
GSM/UMTS network not found
GSM/UMTS network found
Connected to the GSM/UMTS network