In
these safety instructions the word
"product" refers
to
the Canon
DVD
Camcorder DC320/DC31 0 A and all its
accessories.
1 Read Instructions - All the safety and
operating instructions should be read
before the product is operated.
2 Retain Instructions - The safety and
operating instructions should be retained
for future reference.
3 Heed Warnings - All warnings on the
product and
in
the operating instructions
should be adhered to.
4 Follow Instructions - All operating and
maintenance instructions should be
followed.
5 Cleaning - Unplug this product from the
wall outlet before cleaning. Do not use
liquid
or
aerosol cleaners. The product
should be cleaned only as recommended
in this manual.
6 Accessories - Do not use accessories
not recommended
in
this manual as they
may be hazardous.
7 Avoid magnetic
or
electric fields - Do
not use the camera close
to
TV
transmitters, portable communication
devices
or
other sources
of
electric
or
magnetic radiation. They may cause
picture interference,
or
permanently
damage the camera.
S Water and Moisture - Hazard
of
electric
shock - Do not use this product near
water
or
in
rainy/moist situations.
9 Placing
or
Moving - Do not place on an
unstable cart, stand, tripod, bracket
or
table. The product may fall, causing
serious injury
to
a child
or
adult, and
serious damage
to
the product.
A product and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces may
cause the product and
cart combination to
overturn.
10
Power Sources - The CA-570 Compact
Power Adapter should be operated only
from the type
of
power source indicated
on the marking label. If you are not sure
of
the type
of
power supply to your home,
consult your product dealer
or
local
power company. Regarding other power
sources such as battery power, refer
to
instructions
in
this manual.
11
polarization - The CA-570 Compact
Power Adapter is equipped with a
polarized 2-prong plug
(a
plug having one
blade wider than the other).
The 2-prong polarized plug will fit into the
power outlet only one way. This is a
safety feature. If you are unable
to
insert
the plug fully into the outlet, try reversing
the plug. If the plug still fails
to
fit, contact
your electrician
to
replace your obsolete
outlet. Do not defeat the safety purpose
of
the polarized plug.
12 Power Cord Protection - Power cords
should be routed so that they are not
likely to be walked on or pinched by
items placed upon or against them. Pay
particular attention
to
plugs and the point
from which the cords exit the product.
13
Outdoor Antenna Grounding - If
an
outside antenna is connected
to
the
product, be sure the antenna is grounded
so as
to
provide some protection against
voltage surges and built-up static
charges. Section 810
of
the National
Electrical Code, ANSI / NFPA No.
70-
1984, provides information with respect
to proper grounding
of
the mast and
supporting structure, grounding
of
the
lead-in wire
to
an
antenna discharge unit,
size of grounding conductors, location
of
antenna discharge unit, connection to
grounding electrodes, and requirements
for the grounding electrode. See figure 1.
3
To Next Page
Loading...
