Canon DC310 - Reviewing and Deleting Recorded Scenes; Quick Start Function Details; Playback and Deletion of Last Scene

[QUICK START]
again
the
camcorder
is
ready
to
start recording within approx.
1
second*, ensuring you
do
not
miss
important
shooting opportunities.
*
The
exact time
required
until
the camcorder
is
ready
to start recording
may
vary
depending
on
the
shooting conditions.
I
~r\'r-l
r
PLAY-l
L_~~
...
_-.J
L~
...
_j
(OJ
21)'
1
Press
IQUICK
START]
firmly.
The
standby
lamp
flashes at first
while
the
camcorder
is preparing and
then stays on when it enters
the
standby
mode.
2
When you wish to resume
recording, press
[QUICK
START]
again.
Within approx.
1
second,
the
camcorder
is ready
to
record.
CD
NOTES
• When you wake up the camcorder from
standby mode, the following settings will
be changed automatically:
- Manual focus returns to automatic
focus
(AF).
- Manual exposure adjustment returns to
automatic exposure.
- Zoom position returns to full wide
ang/eW.
• The camcorder will shut off if left
in
standby mode for
10
minutes, regardless
of
the
[POWER
SAVE]
setting
(OJ
68).
You
can select the length of time until
shut-off with the [@STANDBY
OFF]
setting
(CD
68).
To
restore the power if the camcorder
shut off, turn the
IIillD
switch toward
MODE and release it, or turn the
camcorder off and then on again.
• If you perform any of the
follOWing
actions while
in
standby mode (while the
standby lamp
is
on),
the camcorder will
be woken up from standby mode.
- Open the disc compartment cover.
- Change the position of the
-,.
/0
switch.
-
Turn
the IIillD
switch toward MODE.
Reviewing
and
Deleting
the
last
Scene
Recorded
Even in "'1*111:)
mode
you can play
back
the
last scene recorded in
order
to
check
it. If you are using a DVD-RW
disc, you can also delete
the
scene
while reviewing it.
NEXT
V
1
If the joystick guide does not
appear
on
screen, press
@
to
display it.
If
©
does
not
appear on
the
joystick
guide, repeatedly push
the
joystick
(~)
toward
[NEXT]
to
display it.
2
Push the joystick
(~)
toward
©.
• The
camcorder
plays
back
the
last
scene (but
without
sound) and
returns
to
record pause mode.
• While reviewing
the
scene, select
the
.;l
icon and press
@
to
return
to
the
recording mode.
Video.
33