Sensor Cleaning
The camera has a Self Cleaning Sensor Unit attached
to the image sensor's front layer (low-pass filter) to
shake off dust automatically.
The Dust Delete Data can also be appended to the
image so that the dust spots remaining can be erased
automatically by Digital Photo Professional (provided
software).
Minimizing
Dust
• When changing lenses,
do
it
in
a place with minimal dust.
• When storing the camera without a lens attached, be sure to
attach the body cap to the camera.
Remove dust on the body cap before attaching
it.
[l] Even while the
Self
Cleaning Sensor Unit is operating, you can
press the shutter button halfway to interrupt the cleaning and start
shooting immediately.
To Next Page
Loading...
