Turning on the Power
About
the
Automatic
Self-Cleaning
Sensor
• Whenever you set the power switch to
<ON/,»
or <OFF>, the
sensor cleaning will be executed automatically. During the sensor
cleaning, the LCD monitor will display
<
.+0+
>. Even during the
sensor cleaning, you can still shoot by pressing the shutter button
halfway (p.35) to stop the sensor cleaning and take a picture.
• If you turn
onloffthe
power switch
<ON/'»I<OFF>
at a short
interval, the
<
.+0+
> icon might not be displayed. This is normal and
not a problem.
,,-----
-
<OFF>
<ON>
<,»
: The camera is turned off and
does not operate. Set to this
position when not using the
camera.
: The camera
tu
rns on.
: The camera and
< 0 >
operate (p.37).
I
About
Auto
Power
Off
•
To
save battery power, the camera turns off automatically after about
1 minute
of
non-operation.
To
turn on the camera again, just press
the shutter button halfway (p.35).
You can change the auto power-off time with the menu's
[~.
Auto
power
off] setting (p.44).
[J]
If you set the power switch to <OFF> while an image is being recorded to
the card,
[Recording
...Jwill be displayed and the power will turn off after
the card finishes recording the image.
27
To Next Page
Loading...
