Before You Start
!:
...........:...;+;-
08/241'0813:10
.
E~gli~~.
NTSC
mmI!J
Setting
the
Interface
Language
1
Select
[Language].
• Under the
[~:]
tab, select
[Language]
(the third item from the
top), then press
<@>.
2 Set
the
desired
language.
• Turn the < 0 > dial to select the
language, then press
<@>.
• The language will change.
LCD
brightness
Date/Time
Language
Video
system
mmI!J
Setting
the
Date
and
Time
Check if the camera's date and time are set correctly. If necessary, set
the correct date and time.
1
Select
[Date/Time].
• Under the
[~:]
tab, select
[Datel
Time],
then press <@>.
(08/24/2008)
OK
Cancel
.
08
.
24
.
2ooaTIJ:
to:
00
...
mm/dd/yy
Date/Tlme
Set
Date/Time
2 Set
the
date,
time
and
date
display
format.
•
Turn
the
< 0 >
dial
to
select
the
number.
• Press <
@>
so ¢ is displayed.
•
Turn
the
<0 >
dial
to
select
the
desired
setting,
then
press
<@
>
(Returns
to
D
).
3
Exit
the
setting.
• Turn the < 0 > dial to select [OK],
then press
<@>
.
..
The date/time will be set and the
menu will reappear.
[i] It is important to set the correct date/time because it will be recorded
together with each captured image.
42
To Next Page
