Canon EOD 50D - Using the Battery Grip

Using the Battery Grip
These are supplemental instructions for using Battery Grip BG-E2 with
this camera. For instructions other than "Detaching the Battery
Compartment Cover" and "Battery Life" explained below, refer to the
Battery Grip BG-E2 Instruction Manual.
If you have Battery Grip BG-E2N, read the BG-E2N's Instruction
Manual.
-----------_ .. _------------------------
Detaching the Battery Compartment Cover
• Put the camera on a flat surface and
hold it firmly so it does not fall.
• Open the battery compartment cover
and pull it out at a slanted angle to
remove.
• Store the detached battery
compartment cover in the battery
gnp.
•
To reattach the battery compartment
cover, slant it at the same angle when
it was removed and insert the cover's
hinge into the camera.
Battery Life
At 23°C / O°C (73°F / 32°F)
[Approx. shots]
Power··
'·'2.-
i;·NoFlash
'.; ........ -.-.-
'50°/0 Flash Use
.... :.'.' .'.
. i,; ..... . . .'
'. .. ...../ - .. _.- " .
Battery Pack
1600/1360 1280/1080
BP-511A x 2
Size-AA/LR6 alkaline
400/90
300/70
batteries
Live View Shooting
360/280
340/260
BP-511A x 2
192