Before You Start
rmm.1
Set the Power-off Tlme/Auto Power Off
You
can change the auto power-off time for the camera to turn off
automatically after a certain period
of
non-operation. If you do not want
the camera to turn off automatically, set this to [Off]. After the power
turns off, you can turn
on
the camera again
by
pressing the shutter
button or other button.
1 Select [Auto power off].
• Under the
[~.]
tab, select [Auto
power
off], then press <@>.
2 Set the desired time.
• Turn the <0 > dial to select the item,
then press
<@>.
[ll
Even if [Off] has been set, the LCD monitor will turn off automatically after
30 min. to save power. (The camera's power does not
turn off.)
44
To Next Page
Loading...
