Handling rolls
4. Lift the Release Lever .
5. Holding the paper on both sides, pull the jammed portion out toward the front. Use a scissors or
cutting tool to cut away the printed or wrinkled portion.
Caution
• When cutting paper , be careful to avoid injury and damaging the printer .
6. If the Carriage is on the left, move the Carriage to the right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may
occur when you turn on the printer .
132 Handling Paper
To Next Page
Loading...
