Handling sheets
Loading the Sheet in the Printer
Note
• For details on supported types and sizes of the paper , see “Paper Sizes” or the Paper Reference
Guide . ( → P .1 14) ( → P .109)
• Loading a sheet while a roll remains loaded may cause paper jams. W e recommend removing the
roll if you will load a sheet. ( → P .128) ( → P .129)
T o prevent the roll from unwinding if you leave it loaded, wrap a sheet of paper around the roll and
tape it to fasten it.
• If the Platen is dirty , clean inside the T op Cover . ( → P .742)
• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load
the paper .
1. If you send a print job from a computer beforehand, the type and size of paper are shown on the
Display Screen . Lift the Release Lever and open the T op Cover .
148 Handling Paper
To Next Page
Loading...
Need help?
General