Messages regarding paper
Regular printing is selected, but a roll is loaded.
Cause Corrective Action
Hold down the Stop button for a second or more to
cancel printing.
Press the OK button and remove the roll, and then
load a sheet of the paper type and size you have
specied in the printer driver .
( → P .128)
( → P .89)
A print job for printing on sheets was sent when a
roll is loaded.
Hold down the Stop button for a second or more to
cancel printing.
Change the printer driver settings to match the roll
already loaded and try printing again.
Y ou are using a roll with the Media T ake-up Unit , but
a print job requiring sheets was sent.
1. Press the Stop button for a second to cancel the
job involving sheets.
2. Choose Paper Cutting in the menu.
3. Press the Load/Eject button and remove the roll.
4. Load a sheet and resend the print job.
Paper jam.
Cause Corrective Action
A paper jam occurred in the printer during printing. Lift the Release Lever and remove the jammed paper .
( → P .131)
( → P .153)
Error Message 789
To Next Page
Loading...
Need help?
General