Control Panel
Paper Menu
Setting Item Description, Instructions
Cut Sheet T ype ( *1 ) Choose the type of sheets.
( → P .147)
Roll Media T ype ( *1 ) Choose the type of roll.
( → P .125)
Chk Remain.Roll Choose On to print a barcode at the end of a roll before you remove it. The
printed barcode can be used in managing the amount of roll paper left. Choose
Off if you prefer not to print the barcode.
Roll Length Set Displayed if Chk Remain.Roll is On .
If a barcode is not printed on rolls, specify the roll length. The roll length is
displayed in meters or feet, depending on the setting in Length Unit .
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .109) The type of paper indicated in the printer driver and related software (as well as on the
Control Panel ) is updated when you install the printer driver from the User Software CD-ROM or if
you update paper information by using the Media Conguration T ool . See Media Conguration T ool
Guide (Windows) or Media Conguration T ool Guide (Macintosh).
Printer Parts 55
To Next Page
Loading...
Need help?
General