Adjusting the feed amount
Adjusting the V acuum Strength
When printing on heavyweight paper or paper that curls or wrinkles easily , if the printing rubs or the edge
of paper is wrinkled from rubbing, results may be improved by adjusting the strength of vacuum against
paper on the Platen .
1. Press the Menu button to display MAIN MENU .
2. Press ▲ or ▼ to select Paper Details , and then press the ► button.
3. Press ▲ or ▼ to select the type of paper , and then press the ► button.
4. Press ▲ or ▼ to select V acuumStrngth , and then press the ► button.
5. Press ▲ or ▼ to select the level of suction against paper on the Platen , and then press the
OK button.
Adjustments for Better Print Quality 691
To Next Page
Loading...
