Control Panel
T urning the printer off
Important
• Never disconnect the printer ’ s power supply or unplug it during a print job. This could damage the printer .
1. Make sure no print jobs are in progress.
If the Message lamp is ashing, check the message on the Display Screen and take action as
necessary .(See "Error Messages.")
If the Data lamp is ashing, the printer is receiving a print job. T urn of f the printer only after
printing is nished.
2. Hold down the Power button for more than a second.
After Shut Down.. Please W ait.. is shown on the Display Screen , the printer shuts of f.
28 Printer Parts
To Next Page
Loading...
Need help?
General