Printer Driver
Setting Item Description
D Fit Paper Size Scales the document image to match the paper size.
E Fit Roll Paper W idth Scales the document image to match the roll width.
F Scaling Resizes the document image based on a specied scaling
value. Enter a value in a range of “5-600.”
G Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see “Paper Sizes”.
(→P .1 14)
H Orientation Choose the printing orientation.
Making the Original Orientation Match the Paper Orientation
(→P .444)
K Rotate Page 90 degrees (Conserve
Paper)
Activate this setting to rotate the document image by 90
degrees before printing.
Conserving Roll Paper by Rotating Originals 90 Degrees
(→P .417)
L Paper Source Choose the media source, as desired.
Options displayed in the list vary depending on the selection in
Media T ype in the Main sheet.
M Roll Paper W idth Choose the roll width.
For details on available roll widths, see “Paper Sizes”. (→P .1 14)
N Auto Cut Y ou can activate or deactivate automatic cutting and printing of
cut lines, as desired. Click to display the Automatic Cutting
Settings dialog box.
Under A Automatic Cutting , you can specify Y es or No and
Print Cut Guideline .
Cutting Roll Paper After Printing (→P .458)
P Output Method Click to display the Output Method dialog box, which enables
you to complete the Output Method and Name of data to
be saved settings.
O Size Options
Click to display the Paper Size Options dialog box, which
enables you to register additional paper sizes or select the size
system for use.
S Defaults
Restores all settings on the sheet to the default values.
502 Windows Software
To Next Page
Loading...
