Other Maintenance
10. Push down the release lever (a) as shown as you gently return every Ink T ank Lock Lever to
the original position.
1 1. Close the Ink T ank Cover .
At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge during this process.
When the process is nished, Finished preparing to move printer . T urn off printer . is
displayed.
12. Press the Power button and turn of f the printer .
Important
• T urn of f the printer before you unplug it. It may damage the printer if you unplug it before it is of f and
transfer it in that state. If you accidentally unplug the printer , plug it in again, reinstall the Ink T anks ,
wait until the printer comes online, and follow this procedure again.
13. Disconnect the power cord, interface cable, and Media T ake-up Unit Power Inlet .
Maintenance 749
To Next Page
Loading...
