Control Panel
Adjust Printer Current printer settings.
Head Adjust
Auto Print
A1-F2
Printhead adjustment value.
Feed Priority
Adjust Length
Settings related to paper feeding.
Calibration The color calibration setting value.
Execution Log The calibration log.
Date:
Media:
Indicates the date calibration was performed and the type of paper
used.
Use Adj. V alue: This value indicates whether the results of color calibration are used
or not.
Interface Setup Current network settings.
EOP T imer Sets the elapsed time between receiving last data and
canceling printing.
TCP/IP
IP Mode
Protocol
DHCP
BOOTP
RARP
Settings related to TCP/IP .
IP Setting
IP Address
Subnet
Mask
Default
G/W
IP Setting values.
NetW are
NetW are
Frame T ype
Print Service
NetW are settings.
AppleT alk V alues that specify whether AppleT alk is active or not.
70 Printer Parts
To Next Page
Loading...
