MediaType Mismatch
Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause, the type of paper loa-
ded does not match the type specified in the
printer driver.
Follow these steps to ensure the paper type matches on the printer and
in the printer driver.
1. Press â–² or â–¼ to select Stop Printing, and then press the OK but-
ton.
2. Change the paper type setting in the printer driver to the type loa-
ded in the printer and try printing again.
Follow these steps to ensure the paper type matches on the printer and
in the printer driver.
1. Press â–² or â–¼ to select Change Paper, and then press the OK but-
ton.
2. Replace the loaded paper with paper of the type and size you have
specified in the printer driver.
(See "Loading and Printing on Rolls.")
→P.5
(See "Loading and Printing on Sheets.") →P.9
Press â–² or â–¼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the
printing quality.
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper
loaded does not match the type specified in
the printer driver.
You can continue to print, but note that this error may cause problems
in the printing results.
The paper is too small.
Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause or Hold Job, paper small-
er than the size specified in the printer driver is
loaded.
Press â–² or â–¼ to select Print, and then press the OK button to re-
sume printing.
However, note that this error may cause paper jams and affect the
printing quality.
Adjust the paper size setting in the printer driver to match the size
loaded in the printer as follows.
1. Press â–² or â–¼ to select Stop Printing, and then press the OK but-
ton.
2. Change the paper size setting in the printer driver to the size loa-
ded in the printer and try printing again.
Replace the loaded paper with paper of a size that matches the size
setting in the printer driver as follows.
1. Press â–² or â–¼ to select Change Paper, and then press the OK
button to stop printing.
2. Replace the loaded paper to match the paper width setting in the
printer driver and try printing again.
Error Message
>
Messages regarding paper
>
MediaType Mismatch iPF6300S
13
1052
To Next Page
Loading...
Need help?
General