x printhead error (x is L, R, or not displayed)
Cause Corrective Action
There is a prob-
lem with the
Printhead.
Follow these steps to replace the Printhead.
1. Open the Top Cover.
2. Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R if
Printhead R is displayed. If neither left or right is indicated, replace both Printhead L and Print-
head R with new ones.
(See "Replacing the Printhead.") →P.982
Follow these steps to replace the Printhead.
1. Turn off the printer, wait a while, and then turn it on again.
2. Open the Top Cover.
3. Replace the left printhead with a new one if Printhead L is displayed and the right one if Print-
head R is displayed. If neither left or right is indicated, replace both printheads.
(See "Replacing the Printhead.") →P.982
No x printhead (x is L, R, or not displayed)
Cause Corrective Action
No Printhead is
installed.
Install the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is dis-
played. If neither left or right is indicated, install both Printhead L and Printhead R.
(See "Replacing the Printhead.") →P.982
Execute printhead cleaning.
Cause Corrective Action
The Printhead noz-
zles are clogged.
Follow these steps to clean the Printhead.
1. Stop printing by pressing â–² or â–¼ to select Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.981
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.") →P.982
Press â–² or â–¼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1. Press the OK button on the Control Panel to stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.981
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.") →P.982
Error Message
>
Messages regarding printheads
>
iPF6300S x printhead error (x is L, R, or not displayed)
13
1069
To Next Page
Loading...
Need help?
General