Manual (when using media that cannot be cut with the Cutter Unit )
1.
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to select the Paper tab (
).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2. Press the OK button. The Paper Menu is displayed.
3. Press â–² or â–¼ to select Paper Details, and then press the OK button.
4. Press â–² or â–¼ to select the type of paper, and then press the OK button.
5. Press â–² or â–¼ to select Cutting Mode, and then press the OK button.
6. Press â–² or â–¼ to select Manual, and then press the OK button.
7. Print the job.
The printer stops advancing the paper after printing.
8. Press the Feed button.
Handling Paper
>
Handling rolls
>
Specifying the Cutting Method for Rolls iPF6300S
6
800
To Next Page
Loading...
Need help?
General