Important
• Always make sure the loaded paper matches the type of paper specified in the settings. Adjustment
cannot be completed correctly unless the loaded paper matches the settings.
2. On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to select the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3. Press the OK button.
The Set./Adj. Menu is displayed.
4. Press â–² or â–¼ to select Adjust Printer, and then press the OK button.
5. Press â–² or â–¼ to select Adj Far Ed Feed, and then press the OK button.
6. Press â–² or â–¼ to select Yes, and then press the OK button.
A test pattern is printed for adjustment.
C1 is displayed on the Control Panel.
7. Examine test pattern C1. Determine the pattern in which banding is least noticeable. Press â–² or â–¼ to select this
pattern number, and then press the OK button.
C2 is displayed on the Control Panel.
Adjustments for Better Print Quality
>
Adjusting the feed amount
>
iPF6300S Adjusting Color on the Trailing Edge of Sheets
7
841
To Next Page
Loading...
Need help?
General